常见问题解答关于我们的产品和解决方案的常见问题

所有常见问题(1742 total: showing 561-580)

Can a MEASNET calibration be obtained for a P2546A?
Does the P2546A have a mercury switch?
Can a MEASNET calibration be obtained for an A100LK?
Can the A100LK be ordered without a cable?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS1K modules?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS120 modules?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS350 modules?
Can more than one strain gage use the same excitation terminal?
What needs to be remembered when trying to excite multiple strain gages from the same excitation channel?
What is necessary for making strain gage measurements with Campbell Scientific data loggers?
What is used to wire an AVW200-series module to the control ports on the CR3000, CR1000, or CR800?
Can a CR3000, CR1000, or CR800 communicate with an AVW200-series module via an RS-232 port?
How fast can the AVW200, AVW206, AVW211, or AVW216 make a measurement?
How many AM16/32B multiplexers can be attached to one AVW200-series module?
What might cause an AVW200-series module to not communicate with a data logger?
In a wireless network, can the radio of an AVW206, AVW211, or AVW216 translate data from other AVW200-series modules?
How many AVW200-series modules can communicate with a CR1000?
Is there a way to request and obtain the voltage and radio signal strength from a remotely located AVW206 using CRBasic?
How strong is the signal of the built-in radio on the AVW206, AVW211, and AVW216?
Is an AVW200-series module required on vibrating wire transducers to limit noise?

上一页下一步